Fire & Smoke Damage Restoration in Lumberton - 24/7 Dispatch, Board-Up the Same Day

Fast, Reliable Fire & Smoke Damage Restoration Across Lumberton

Fire and smoke damage in Lumberton costs between $2,800 and $8,500 for a typical kitchen or garage fire, with structural repairs adding $4,000 to $25,000 depending on how far the flames traveled. We can usually have a crew on site within 60 to 90 minutes of your call because we stage equipment near the 77657 corridor. Call (888) 534-8116 and Wade Ferris or one of his senior crew leads will pick up, not an answering service.

Call (888) 534-8116

Lumberton’s low-lying position along Village Creek and the Neches River means most homes here have already survived at least one flood. That history changes how we approach every fire job, because what looks like simple soot damage on the surface often has moisture and mold problems hiding underneath. You need a crew that understands slab-on-grade construction, post-Harvey repairs, and what happens when Imelda floods meet a structure that never fully dried out the first time. That’s the work we do.

Why Wade’s Restoration of Houston Is Lumberton’s Preferred Fire & Smoke Damage Restoration Company

Wade Ferris founded this company in 2007 and put his name on the truck. He still answers his own phone at midnight. When you call about a fire in Lumberton, you’re not getting a franchise call center in another time zone. You’re getting someone who knows that homes along South Main Street and the neighborhoods off Keith Road were built in the 1970s and 1980s, back when fire codes were different and wiring was simpler.

Our Fire & Smoke Damage Restoration team has worked on homes throughout the 77657 zip code, from the older subdivisions near Lumberton High School to the newer construction off Highway 69. We know which houses are slab-on-grade, which have crawls, and which had hurried post-Harvey repairs that are now part of the problem. That local familiarity means we can scope a job accurately on the first visit instead of discovering surprises halfway through.

Every fire and smoke job we do in Lumberton comes with the 90-Day Done Right Promise, in writing. If the odor comes back or the structure wasn’t dried correctly, Wade comes back and makes it right. No argument, no invoice. We also run background-checked, uniformed crews using IICRC-certified protocols and professional-grade equipment from Dri-Eaz, Phoenix, and Injectidry. You’ll see documentation of every moisture reading we take, every day, handed to you at the end of the job. Almost nobody else in this trade does that.

Our Fire & Smoke Damage Restoration Services in Lumberton

Structural Fire Repair

When a fire burns through load-bearing framing or compromises a slab-on-grade foundation, this is the part of the job that matters most. Lumberton’s older brick-veneer homes were built before modern fire-blocking standards, which means fire travels through wall cavities faster than in newer construction. We open every stud bay, inspect every junction box, and document what we find before we rebuild anything. If the framing is charred beyond safe load capacity, we replace it with code-compliant lumber and proper fire-blocking.

Odor Removal & Deodorization

Smoke odor in Lumberton homes is harder to kill than in drier climates because the air itself holds so much moisture. When relative humidity sits above 85% for weeks, smoke particles bond to damp drywall, carpet backing, and even the paint on your walls. Thermal fogging and ozone treatment work, but only after the structure is fully dry. That’s why we run Dri-Eaz dehumidifiers and Injectidry drying mats first, then treat odor. Skipping the drying step is the number one reason Lumberton homeowners tell us they can still smell smoke months after another company “finished” the job.

Contents Cleaning & Pack-Out

Your furniture, clothing, and keepsakes absorbed smoke too, and Lumberton’s humidity means that residue is stickier and harder to remove than in places like West Texas. We do on-site ultrasonic cleaning for hard goods and pack-out cleaning for soft goods, textiles, and documents. Every item gets a photo-documented inventory before it leaves, so your insurance adjuster sees exactly what was cleaned and what needed replacement. If you have family photos, quilts, or antique furniture that survived Harvey and Imelda, we treat those with the same care we’d give our own.

Emergency Board-Up & Tarping

A fire often blows out windows or opens holes in the roof, and Lumberton’s afternoon thunderstorms can roll in fast. We board up and tarp the same day, securing the structure against both weather and trespassers. This is part of the mitigation phase, and it’s how we prevent a fire job from becoming a water job. Call us before you call a general contractor.

Trusted Brands We Service in Lumberton

When we set up drying and air-scrubbing equipment after a fire in Lumberton, we’re running professional gear from Injectidry, Dri-Eaz, XPOWER, and B-Air. These are the machines that actually pull moisture out of slab-on-grade floors and smoke-laden wall cavities, not rental-store units with half the capacity. The Injectidry mats we use on Lumberton’s vinyl and laminate floors are particularly important here, because those floors were often installed over damp slabs after Harvey and are now trapping moisture beneath them. We stock replacement parts and filters for Lumberton jobs, so there’s no waiting on a shipment from Houston while your walls stay wet.

Common Fire & Smoke Damage Restoration Problems We See in Lumberton Homes

• Two generations of mold beneath the soot. Many Lumberton homes were dried hastily after Harvey in 2017, sealed up, then flooded again during Imelda in 2019. When fire damage exposes those wall cavities, we routinely find two separate mold layers with different growth patterns. The inner Harvey-era layer was never fully dried before the wall was closed. That changes the entire scope of a fire restoration, because you can’t just clean soot when hidden mold spores are going to keep producing odor.
• Slab-on-grade floors trapping smoke against damp concrete. Lumberton’s slab foundations wick ground moisture upward continuously. If post-Harvey vinyl or laminate flooring isn’t removed after a fire, smoke and soot get trapped between the flooring and the damp slab. The odor never goes away, and mold starts within 48 to 72 hours. We pull those floors before drying begins, every time.
• 1970s wiring that smoldered inside the wall. Older Lumberton homes have original aluminum or cloth-insulated wiring that can smolder for hours after a small fire is out. Southeast Texas humidity above 85% accelerates corrosion on any exposed copper, which means a junction box that got damp during suppression is now a future fire risk. We open and inspect every one.
• Prematurely “finished” restorations from the Harvey era. After Harvey, insurance deadlines pushed a lot of Lumberton homeowners to accept quick dry-outs and fast rebuilds. Those shortcuts are still in the walls. When a fire hits those same structures, the problems compound. You need a crew that knows how to document pre-existing damage separately from fire damage, because your adjuster will ask.

Pricing for Fire & Smoke Damage Restoration in Lumberton, TX

We Also Serve Cities Near Lumberton

Our crews handle fire and smoke damage restoration in Lumberton and the surrounding communities, including Beaumont, Liberty, Dayton, and West Livingston. If you’re just outside the 77657 zip code, call anyway. We know these roads, and we’ll tell you straight when we can be there.

FAQs - Fire & Smoke Damage Restoration in Lumberton