Fast, Reliable Mold Remediation Across Texas City
Mold remediation in Texas City runs $1,800 to $6,500 for a typical single-room job, and $4,000 to $15,000+ for whole-home work after a surge event. Most Texas City homes we see need a combination of removal, drying, and air quality restoration, not just a surface scrub. If you’ve found mold near a bathroom, under a kitchen sink, or behind baseboards in a slab-on-grade home, call (888) 534-8116 and we’ll have Wade’s crew at your door fast.
Texas City is different from every other market we work in. The houses are older, the water table is basically at your ankles, and the salt air never stops working on wood framing and concrete. You need someone who understands that. We do.
Why Wade’s Restoration of Houston Is Texas City’s Preferred Mold Remediation Company
Wade Ferris started this company in 2007, and he still answers his own phone. When a Texas City homeowner calls at 10 p.m. because water is standing in a hallway, Wade picks up. Not a call center. Not a voicemail. Him. That matters more than anything else we could write here.
Our Mold Remediation team has spent years working the 77590, 77591, and 77592 zip codes. We know the post-Ike rebuilds along 9th Avenue North. We know the older ranch homes near the industrial waterfront. We know what happens when a slab-on-grade house takes saltwater and nobody addresses the moisture properly. It comes back. We fix it the first time.
Every job comes with the 90-Day Done Right Promise in writing. If mold returns or the job wasn’t done right, Wade comes back and makes it right. No charge. That’s the kind of accountability you get when the owner’s name is on the truck and he’ll run into you at the hardware store on Saturday.
- Live person answers 24/7: Wade or a member of his crew, not a phone tree.
- Free second opinion: Bring us any written estimate and we’ll review it honestly.
- No trip charge inside our own county: We come out, assess, and tell you what’s really going on.
- Senior & Veteran 10% discount: Always, on every job.
Our Mold Remediation Services in Texas City
Mold Inspection & Testing
Before we remove anything, we find out what kind of mold we’re dealing with and where it’s coming from. In Texas City, that means checking behind baseboards in slab homes where moisture wicks up through concrete. A full inspection with lab sampling in Texas City typically runs $350 to $700 depending on the number of rooms and whether we’re testing interior air, wall cavities, or both.
Mold Removal
Removal means cutting out contaminated drywall, treating framing with antimicrobial, and running HEPA air scrubbers so spores don’t spread to the rest of the house. Texas City homes from the 1950s through 1970s have wood framing that salt air has been attacking for decades. We treat what’s there and replace what can’t be saved. Typical mold removal in Texas City runs $1,500 to $5,000 for one or two rooms.
Black Mold Remediation
Black mold, or Stachybotrys, loves the damp, dark wall cavities we see in Texas City after a slow leak or surge event. Black mold remediation in Texas City runs $2,500 to $7,500 per affected area because it requires full containment, negative air pressure, and disposal of porous materials. We don’t just kill the surface. We remove the material it’s feeding on.
Air Quality Restoration
Once the mold is gone, the air in your house still carries spores and musty odor. We use HEPA filtration and drying equipment from Dri-Eaz and XPOWER to clean the air, not mask the smell. Air quality restoration in Texas City typically runs $500 to $1,800 depending on square footage and how long the mold has been active. This step is not optional after a real mold problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Texas City
We run B-Air and Dri-Eaz air movers and dehumidifiers on Texas City jobs because they’re built for the humidity we get here off Galveston Bay. Our techs hold IICRC certifications and follow RIA protocols, which means the work meets the same standards adjusters expect. When you call Wade’s Restoration, you get professional-grade drying and remediation equipment, not rented box fans from a hardware store. We stock what we need to start work in Texas City the same day we arrive.
Common Mold Remediation Problems We See in Texas City Homes
- Saltwater wicking through concrete slabs: Post-Ike homes, and even the ones that survived Ike, have slabs that absorb saltwater. The salt stays in the concrete and keeps pulling moisture from the air, so mold returns weeks after a “successful” dryout. Standard freshwater protocols don’t account for this. In Texas City, our dryout timelines run 3 to 7 days longer than the same job inland.
- Hydrocarbon residue from industrial floodwater: When floodwater moves through refinery buffer zones near the industrial waterfront, it leaves petroleum film on framing and subflooring. We see this in Texas City more than anywhere else we work. If it’s not tested and removed, it feeds mold and keeps homeowners from passing re-entry clearance.
- Non-galvanized fasteners corroding: Mold remediation often requires replacing framing components and fasteners. In Texas City’s salt air, plain steel hardware fails within a year. We use stainless or coated fasteners on every job, or the mold won’t be the only thing coming back.
- Post-Ike rebuild roofing failures: Homes rebuilt from 2008 to 2012 are now hitting the age where roof flashing and envelope seals fail. Water gets in, and by the time you see a stain on the ceiling, mold has been growing for weeks. We inspect the whole envelope, not just the visible stain.
Pricing for Mold Remediation in Texas City, TX
| Service | Texas City Typical Range |
|---|---|
| Mold inspection & testing | $350 - $700 |
| Single-room mold removal | $1,500 - $3,500 |
| Black mold remediation (per area) | $2,500 - $7,500 |
| Air quality restoration | $500 - $1,800 |
| Crawl space moisture control | $1,200 - $4,000 |
| Whole-home surge remediation | $8,000 - $25,000+ |
What drives the cost in Texas City is the saltwater factor. If we’re dealing with a freshwater leak, standard pricing applies. If your home took bay surge and the slab is holding salt, expect longer drying, more demolition, and hydrocarbon testing on top of the base removal cost. That’s not an upsell. That’s the reality of this town. Call (888) 534-8116 and we’ll walk the property with you, take moisture readings, and give you a written scope before any work starts. Estimates are free.
We Also Serve Cities Near Texas City
Wade’s Restoration handles mold remediation in Texas City and the surrounding communities. We regularly work in La Marque, Hitchcock, Galveston, and Dickinson. If you’re in one of those towns and dealing with mold, same phone number, same owner picking up, same written guarantee.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Texas City
Mold colonization can begin within 24 to 36 hours of a water event in Texas City because year-round dewpoints in the 70s keep humidity high enough for spores to activate almost immediately. In slab-on-grade homes, moisture wicks up through the concrete and hits the back of baseboards and drywall where nobody can see it. Faster than almost anywhere in Texas. If you’ve had water inside, call (888) 534-8116 the same day.
Yes. Floodwater that moved through refinery buffer zones along the industrial waterfront can leave hydrocarbon residue on framing and subflooring that a standard freshwater protocol never addresses. We test for petroleum sheen and odor before setting up dryout equipment, and we follow Category 3 hazmat clearance procedures when the testing comes back positive. A pipe break is bad. Ike water is a different animal.
Saltwater leaves hygroscopic salt crystals inside the concrete. Those crystals keep drawing moisture out of the air long after the water is gone, so the back side of your drywall stays damp indefinitely. That’s why mold returns in Texas City homes weeks after a dryout that would have worked fine in League City or inland. Our moisture logs document the extended timeline, and Wade hands you the full log at the end of the job.
Because any floodwater that moved through refinery buffer zones can carry petroleum residue that standard dryout equipment will spread into wall cavities and under slabs, not remove. We wipe test for hydrocarbons before and after remediation so the homeowner knows the job was done right and re-entry clearance is real. This workflow does not exist in neighboring Dickinson or League City because those areas don’t sit against the industrial waterfront the same way Texas City does.
Those rebuilds are now 16 to 18 years old, and roofing, flashing, and envelope seals are beginning to fail. Water intrusion starts small, mold grows unseen, and by the time a homeowner notices, the affected area is often three times larger than the visible stain. We inspect the whole envelope, not just the one spot you called about. Free estimate at (888) 534-8116.
Call Wade’s Restoration for Mold Remediation in Texas City
We have been working Texas City homes since 2007. We know the slabs. We know the salt. We know the refinery buffer zones. And we know that the person who answers the phone when you call matters as much as the crew that shows up.
One call to (888) 534-8116 brings Wade to your door. He’ll take moisture readings, explain what he’s seeing, and give you a written scope with a price before any work begins. And if you’re a senior or veteran, you’ll get 10% off, no questions asked. The 90-Day Done Right Promise stays in writing on every mold job. If it’s not right, Wade makes it right.
Call (888) 534-8116 now for a free mold assessment in Texas City, TX. No trip charge inside the county. Live person answers. Always.
Written by Wade Ferris, Owner at Wade’s Restoration of Houston, serving Texas City since 2007.