Fast, Reliable Fire & Smoke Damage Restoration Across Angleton
Fire damage in Angleton doesn’t wait, and neither do we. A typical fire and smoke restoration job in Angleton runs $2,800 to $11,500 depending on how far soot traveled and whether water from the fire department or the storm that preceded it got into your walls. Call (888) 534-8116 and Wade will head out. We know Angleton’s coastal prairie drainage, its slab-on-grade ranches from the 1950s-1980s, and the way Gulf humidity makes every fire job a moisture job too. That local knowledge changes what gets scoped, what gets torn out, and whether the smell stays gone.
Why Wade’s Restoration of Houston Is Angleton’s Preferred Fire & Smoke Damage Restoration Company
Wade Ferris started this company in 2007 with his name on the truck and his cell number in the hands of every customer. In Angleton, that matters. Homeowners around Chocolate Bayou and the county seat area have told us they’d rather deal with one person who answers his own phone than a rotating cast from some national outfit. We’re IICRC-certified and RIA-affiliated, and background-checked, uniformed crews show up with Dri-Eaz, Phoenix, Injectidry, XPOWER, and B-Air equipment. Not rented hardware. Our own gear, maintained and ready.
Ask anyone on your street near the 77515 or 77516 zip. We’ve done fire jobs in Angleton where the insurance adjuster and the homeowner never once had to relay messages through a call center. Wade talks to the adjuster directly, hands you the moisture log from every single day of the job, and puts the 90-Day Done Right Promise in writing. If it’s not done right, he comes back and makes it right. No charge for that.
Response time to Angleton is measured in hours, not days. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but crews serve Angleton locally. When you call at 2 a.m., a live person answers. Often it’s Wade himself. He can have a board-up crew on the road before sunrise.
Our Fire & Smoke Damage Restoration Services in Angleton
Every fire job in Angleton starts with the same truth: this flat coastal prairie holds water. Our Fire & Smoke Damage Restoration work here always includes moisture testing because we know what we’ll find. Here’s what that looks like in practice.
Fire Damage Cleanup
Char, soot, and structural charring get removed down to sound material. In Angleton’s 1950s-1980s single-layer drywall homes, that often means full lower-wall tearouts rather than surface scrubbing. The original drywall in these slab ranches wicks moisture from the slab upward, and after a fire the added water from hoses just accelerates it. We test every cavity.
Smoke & Soot Removal
Soot from a kitchen fire near the Brazos River watershed doesn’t stay in the kitchen. It moves through wall cavities, into closets on the other side of the house, and behind baseboards. In Angleton we treat smoke-damaged structures as dual moisture-and-mold projects from the start. That means opening cavities, drying them below 12% moisture content, and sealing before new drywall goes up.
Odor Removal & Deodorization
Ozone alone won’t cut it here. We’ve been called back to homes where a previous crew ran ozone and walked away, only for humid Gulf air to reactivate soot trapped in wall cavities a month later. In Angleton’s climate, odor removal requires thermal fogging, cavity sealing, and sometimes full lower-wall replacement. Anything less and the smell comes back with the next 70%+ humidity day.
Contents Cleaning & Pack-Out
We inventory, photograph, pack, clean, and store your belongings at our facility. For Angleton families with heirlooms, photo albums, or furniture that survived a fire but soaked up smoke, this keeps them safe while structural work happens. Adjusters get the photo documentation they need, and you don’t have to store bins in a garage that’s already compromised.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Angleton
Our crews work with B-Air air movers and Injectidry drying systems on Angleton fire jobs where water intrusion is part of the picture. These aren’t consumer-grade units. They’re the same professional equipment used by restoration teams across Southeast Texas, and we maintain them in-house. That means no waiting on a rental counter when your walls are wet and your framing needs to dry before sealing. We’re IICRC-certified and RIA-affiliated, which means the work gets done to a standard your adjuster will recognize.
Common Fire & Smoke Damage Restoration Problems We See in Angleton Homes
- Hidden mold behind smoke-damaged drywall within weeks. Restorers who treat only the visible char from a kitchen fire but skip moisture testing in Angleton’s post-storm slabs often find mold behind smoke-damaged drywall within two weeks. The slab keeps wicking moisture upward, and the smoke residue feeds the mold growth. We test every lower wall section before we seal anything.
- Smoke odor that returns when humidity spikes. Crews that rely on ozone alone in 1950s-1980s single-layer drywall homes are often called back when humid Gulf air reactivates soot trapped in wall cavities. Full lower-wall tearouts and sealers are the only fix that lasts in this climate.
- Board-up that ignores prairie drainage. Board-up teams that tarp a fire-damaged roof without checking the flat prairie drainage around Angleton homes can leave lower walls exposed to recurring ponding from the next heavy rain. A small fire job turns into a category-2 flood loss because nobody looked at where water goes on a flat lot.
- Roof decking damage that hides moisture behind char. After a May squall tore a section of roof decking off a 1970s slab ranch near the Chocolate Bayou drainage, our crew arrived to find smoke from a subsequent electrical fire had pulled soot into wall cavities that still held 28% moisture from the earlier storm. Using Dri-Eaz dehumidifiers and an Injectidry system on the lower wall sections, we got the framing back below 12% before treating the smoke contamination. Leaving that hidden moisture would have guaranteed mold behind the new drywall within 48 hours.
Pricing for Fire & Smoke Damage Restoration in Angleton, TX
Here are the ranges you can expect in the Angleton market:
- Fire damage cleanup: $2,800-$6,500 for a typical kitchen or electrical fire with moderate soot spread
- Smoke & soot removal (full house): $4,000-$9,000 depending on square footage and how many cavities are involved
- Odor removal & deodorization: $900-$3,200, with the higher end reserved for full cavity treatments and sealing
- Contents cleaning & pack-out: $2,500-$7,000 based on volume and whether off-site storage is needed
- Emergency board-up & tarping: $400-$1,200 for same-day service to secure the structure
- Structural fire repair: $6,000-$18,000+ for framing, drywall, and rebuild scope on larger fires
What moves these numbers in Angleton specifically is the moisture factor. If your slab has been wicking water since Harvey or since the last heavy rain, the scope expands. We include a free estimate, and we honor a Free Second Opinion on Any Written Estimate. If it’s inside our own county, there’s no trip charge. Seniors and veterans always get 10% off. Call (888) 534-8116 and Wade will give you a straight answer in a written scope before any work starts.
We Also Serve Cities Near Angleton
Our crews regularly handle fire and smoke restoration in Angleton and the surrounding Brazoria County communities. We serve Lake Jackson, Clute, Freeport, and Alvin with the same local approach: moisture testing on every fire job, direct adjuster communication, and a written 90-Day Done Right Promise. No trip charge inside the county.
Serving Angleton, TX - Our Local Coverage Area
We’re based in the Angleton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fire & Smoke Damage Restoration in Angleton
It changes everything about the scoping sequence. Homes that sat in prolonged inundation during Harvey, even if they were “dried” afterward, often have hidden moisture in wall cavities and slab foundations. When a fire happens later, that residual moisture gets trapped behind new smoke residue and produces mold faster than a dry house ever would. In Angleton we treat every fire job as a moisture investigation first. We test cavities, we check slab wicking in lower wall sections, and we document it all in a moisture log you keep. Call (888) 534-8116 and we’ll walk you through what that looks like in your specific home.
Drainage gets addressed before we seal any wall. If your yard ponds after every rain, that water is finding its way toward your slab, and from the slab it wicks into the drywall. A small kitchen fire becomes a much bigger problem when the lower walls we need to seal are actively pulling moisture from below. We’ll look at your drainage, recommend grading or drainage fixes on your property, and sequence the restoration so you’re not paying to dry the same walls twice. The estimate is free and the scope is in writing before work begins.
Because soot trapped in wall cavities reactivates when Gulf humidity climbs over 70%. It’s not that the odor was removed and came back; it’s that it was never fully removed from the cavities in the first place. Ozone treatment alone doesn’t reach soot inside wall cavities, and in Angleton’s single-layer drywall homes from the 1950s-1980s, those cavities are directly connected to humid outdoor air through gaps and cracks. Full cavity treatment and sealing is the only permanent fix. We’ll show you where the soot was hiding and what we did to seal it.
Yes, and it’s a pattern we see often. If a fire damaged your roof decking and the board-up team only tarped the opening without checking the surrounding drainage, the next heavy Gulf rain ponds around your foundation and works into the exposed lower walls. What started as a contained roof fire becomes a category-2 flood loss. During board-up we always check where water pools on your lot and make sure temporary protection handles both the roof and the ground-level exposure. Call (888) 534-8116 the day of the fire and we’ll be out before the next rain.
Pier-and-beam homes give us access under the floor, which means we can dry the subfloor and joists from below. That’s actually an advantage over slab-on-grade homes, where the slab itself wicks moisture into lower walls and we have to open the walls from inside. But pier-and-beam homes from the early county seat era often have original materials, sometimes multiple remodel layers, and electrical systems that don’t match modern code after a fire. We account for that in the repair scope. Slab ranches need full lower-wall treatment; pier-and-beam homes need subfloor inspection and joist drying. Different homes, different sequence. Both get the same 90-Day Done Right Promise.
Get Fire & Smoke Damage Restoration in Angleton Started Today
If you’ve had a fire in Angleton, call (888) 534-8116 right now. A live person answers, day or night, and Wade will get a crew headed your way. Fast board-up, thorough moisture testing, direct adjuster communication, and a written scope before any work starts. That’s how it should work in Angleton, and that’s how it works with Wade’s Restoration of Houston.
Written by Wade Ferris, Owner at Wade’s Restoration of Houston, serving Angleton since 2007.